Model/Brand/Package
Category/Description
Inventory
Price
Data
-
![]()
Category: Development kitDescription: This USERA???? The guide describes the features, operation, and use of the PGA309EVM-USB evaluation module (EVM). This userâ s guide describes the characteristics, operation, and use of the PGA309EVM-USB evaluation module (EVM).6111 -
![]()
Category: Development kitDescription: TEXAS INSTRUMENTS PGA113EVM-B Evaluation module, PGA113EVM-B2566 -
![]()
Category: Development kitDescription: MSP-FET Flash simulation tool for MSP430 Texas Instruments MSP-FET is a powerful flash simulation tool used for developing and debugging MSP430 microcontroller development systems. MSP430 MCU can be programmed and debugged through JTAG interface or Spy Bi Wire (2-wire JTAG) protocol within the system. This tool can be used in Code Composer Studio and IAR embedded workbench development environments with EnergyTrace ™ Perform energy measurement and debugging on all MSP430 devices using technology. Including reverse channel UART, used for bidirectional communication between MSP430 and host PC, in addition to recording test data when running applications, it can also simulate inputs from sensors. Software configurable power supply voltage: 1.8 to 3.6 V @ 100 mA Supports JTAG safety fuse to protect code Supports JTAG and Spy Bi Wire (2-wire JTAG) debugging protocols Supports all MSP430 boards with JTAG sockets Read/Write speeds up to 4 times faster than previous versions of MSP-FET430UIF # # # Comes with MSP-FET interface module 14 conductor cable micro USB cable # # # MSP430 microcontroller, Texas Instruments * * MSP430 platform * * is a mixed signal and ultra-low power microcontroller series from Texas Instruments. The 16 bit RISC architecture is particularly suitable for wireless, low-power industrial, and portable applications. This establishment scope has a sturdy and commonly used location due to its ease of use and a wide range of development tools and support packages. The MSP430 portfolio includes over 400 devices, ranging from MSP430 value models to innovative, highly integrated microcontrollers with embedded FRAM memory. This wide range of products offers integration suitable for various designs and applications. High performance peripherals include USB, RF, LCD controllers, and Sigma Delta ADCs. This enables designers to find suitable MSP430 devices for various low-power applications.6127 -
![]()
Category: Development kitDescription: TEXAS INSTRUMENTS DRV8840EVM Evaluation Module, Single H Bridge Motor Driver, 5A, Phase/Enable Control Interface9681 -
![]()
Category: Development kitDescription: TEXAS INSTRUMENTS PCM5102EVM-U Evaluation module, PCM5102EVM-U4002 -
![]()
Category: Development kitDescription: TEXAS INSTRUMENTS PCM4104EVM Evaluation Board, Digital to Analogue Converter, PCM41049243 -
![]()
Category: Development kitDescription: TEXAS INSTRUMENTS PCM2900CEVM-U Evaluation module, PCM2900CEVM-U2310 -
![]()
Category: Development kitDescription: TEXAS INSTRUMENTS PCM2903EVM-U Evaluation module, PCM2903EVM-U2609 -
![]()
Category: Development kitDescription: Interface development tool Let Your PC Talk I2C Version 3.3a Upgrade8267 -
![]()
Category: Development kitDescription: MCP6N11 The Wheatstone Bridge Reference Design for Instrumentation Amplifier showcases the performance of Microchip's MCP6N11 instrumentation amplifier (INA) and a traditional triple operational amplifier INA using Microchip's MCP6V26 and MCP6V27 auto zero operational amplifiers. The input signal comes from the Wheatstone bridged RTD temperature sensor. Real interference added to the output of the bridge can provide a comparison of real performance. Data can be collected and displayed on a PC for ease of use. USB PICmicro ® The microcontroller and accompanying graphical user interface (GUI) provide methods for configuring the board and collecting sampling data. RTD temperature sensor INA signal conditioning PICmicro signal conditioning and communication PC software (GUI): Thermal management utility # # # Comes with USB cable # # Instrument amplifier, Microchip instrument amplifier is a different type of differential amplifier equipped with input buffer amplifier, without the need for input matching impedance. Features include ultra-low DC offset, low drift, low noise, extremely high open circuit gain, extremely high common mode rejection ratio, and extremely high input impedance.6045 -
![]()
Category: Development kitDescription: DIP Adapter board, used for SMT packaging of Texas Instruments DIP adapter board, can provide a low-cost solution for solving the problem of small surface mount IC packaging in prototype design. This board can be directly connected to existing circuits or used with suitable terminal clamps. Supports the following encapsulation types: SOIC-8 (D or U), TSSOP-8 (PW), MSOP-8 (DGK), SOT23-3, SOT23-5 and SOT23-6 (DBV), SC70-5 and SC70-6 (DCK), and SOT563-6 (DRL). ###Adapter and converter board3125 -
![]()
Category: Development kitDescription: Evaluation module, OPA835 ultra-low power operational amplifier, rail to rail output7877 -
![]()
Category: Development kitDescription: Power Management IC Development Tools P9025AC Evaluation Kit3373 -
![]()
Category: Development kitDescription: MCP3551 The demonstration board is designed to use the WebView installed on a PC ™ Software to demonstrate the performance of MCP3551 22 bit Delta Sigma analog-to-digital (ADC) converter. The demonstration board can be integrated with MPLAB ICD 2 and PICkit ™ 1 Flash Starter Kit or PICkit ™ Used together for developing demonstration/evaluation firmware. You can choose to install another MCP3551 for use with the optional promotion board (sold separately). This board is designed to evaluate MCP3551 with minimal printed circuit board (PCB) noise. The layout of the printed circuit board is designed with low noise to minimize signal noise as much as possible, in order to demonstrate the performance of the 22 bit MCP3551. Three types of precision potentiometers, used to demonstrate the functionality of MCP3551 onboard PIC18F4550, with USB interface, for use in WebView ™ Communication USB interface, used to connect to PC Dataview ™ Software with three tube sockets/connectors in easy to read format and data recording for use with PICkit ™ 1 PICkit ™ 2 or MPLAB ICD 2 programming MCU # # # Analog to Digital Converter - Microchip4653 -
![]()
Category: Development kitDescription: MCP355x Tiny This 1in ´ 1in board is designed to display the performance of MCP3550/1/3 22 bit ADC devices in a simple low-cost application. The circuit is configured with proportional sensors and uses the system power supply as a voltage reference. The MCP355x device's extremely high common mode suppression function and excellent normal mode power suppression at 50 and 60 Hz can provide excellent system performance. USB interface to PC software WebView, used for graphic noise analysis jumper, for selecting reference power as VDD or onboard LM4140 # # # Analog to Digital Converter - Microchip5011 -
![]()
Category: Development kitDescription: 20 V ，4ASynchronous Step Down Regulator with Low Side Driver 20V, 4A Synchronous Step Down Regulator3822 -
![]()
Category: Development kitDescription: P1020 Microprocessor UTM/Security Appliance Solution 800MHz CPU 1GB RAM 32Mb Flash4377 -
![]()
Category: Development kitDescription: P1020/P1011 Microprocessor Reference Design 1GB RAM 16Mb/16Mb/32Mb/128Mb EEPROM/NAND Flash/NOR Flash/SPI ROM Linux 2.6.x Kernel1905 -
![]()
Category: Development kitDescription: DVI Transmitter/Receiver Board With A High Speed Mezzanine Connector Interface6848 -
![]()
Category: Development kitDescription: Sata/SAS HSMC Card Provide Sata Interface Conversion For FPGA Platforms3619 -
![]()
Category: Development kitDescription: TEXAS INSTRUMENTS OPAMPEVM-SOT23SHDN Universal Evaluation Module, for Single/Dual, Operational Amplifiers, MSOP/SOIC/SOT-237401 -
![]()
Category: Development kitDescription: Printed Circuit Board (PCB), 8/14/16 Pin SOIC Package Operational Amplifier5764
